Valspar® Professional Exterior Paint

Valspar

Options

This is an exterior 100% acrylic latex paint developed to provide outstanding durability, fade resistance and mildew resistance. It can be applied at temperatures as low as 35° F allowing you to extend the painting season. Professional Exterior Flat provides a smooth, uniform finish with spray, brush or roller application and can be applied to a variety of exterior surfaces: Wood and metal siding, trim including hardboard, fiber cement board, vinyl, shakes, primed metal, brick, cement, cinder block and stucco.

Contractor quality
100% acrylic latex
Maximum hide
Low temperature application

HOW TO USE

Usage

Properly prepared exterior wood and metal siding and trim including hardboard, fiber cement board, vinyl, primed metal, shakes, brick, cement, cinder block and stucco. Do not use on glazed brick, floors or steps.
Prep

Thoroughly clean the surface and allow to dry. Remove all wax, grease, dirt, chalk, mildew, loose and peeling paint, and other foreign matter. Remove gloss from shiny surfaces. Fill all cracks and joints with Acrylic caulk before top coating. Remove any powdery dust and efflorescence. New or bare surfaces should be primed with an appropriate Valspar primer.
Application

Stir paint thoroughly. Intermix containers to ensure uniform color. Apply with a premiumquality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colors may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
Dry Time

Dry Time @ 77 °F and 50 % Relative Humidity
To The Touch: 1 hour - 24 hour
Recoat: 4 hour
Clean-up & Disposal

Clean up with warm, soapy water.